A weld seam is one of the most common problems encountered in tube laser cutting. Because the weld seam is different from the rest of the material, the process is not as accurate as cutting sheet metal. This issue requires the operators to adjust all operations’ power levels and frequency to ensure that the weld is hidden. Some manufacturers have devised control parameters and technology to eliminate this problem. The laser can automatically adjust power levels, frequency, and duty cycle with these features. This helps the operator focus on getting the material into the machine instead of worrying about the weld seam.
First, you must understand that a laser is a powerful tool that can make it impossible to cut through the tube without a torch. Besides, a laser tube cutting torch requires precise measurements and precise cuts. It can also be tricky to get the parts exactly right. A metal fabricator with years of experience can help you achieve the desired result. After all, you are the one who will be using the machine, so you’ll want to get it right the first time.
Understand the basics of the process:
When you start the process of laser tube cutting, it’s important to understand the basics of the process. A CAD program is necessary as it allows you to plan the whole process from start to finish. Using design software can eliminate the need to import and export programming. This makes the whole process much more efficient. Moreover, it will ensure that the laser can cut through all the material with no difficulty.
Important to know the procedure to perform:
When tube laser cutting, it’s important to know the procedure to perform. The procedure is similar to fiber laser cutting, but tube cutting is more involved. The process is more complex than fiber cutting, so you must be sure to know the requirements of the machine. You can ensure that the laser tube is cut to your specifications by following these procedures. This will also ensure the highest level of accuracy. When you’re ready to begin the process, you can start your work.
Keep the machine clean:
It’s essential to clean the mirrors and lenses, and the laser. They can reduce the power of the tube. Keeping the laser clean will ensure that the operating speed is high and that the tubes last longer. If you’re not careful, you’ll end up with a mess. Therefore, it’s vital to make sure you keep the machine in pristine condition at all times.